BioFuels Technologies Forum  

Go Back   BioFuels Technologies Forum > FORD SUPER DUTY / HEAVY DUTY DIESEL > 99-03 7.3

Reply
 
Thread Tools Display Modes
  #1  
Old 11-18-2015, 03:05 AM
biostroker's Avatar
biostroker biostroker is offline
Senior Vegistroker
 
Join Date: Oct 2008
Location: Victor, ID
Miles on Grease: 100,000
$ Estimated Saved: $20,000 at $4/gallon
Posts: 296
Default Installing a used V3 Kit...

In the near future I'm going to install a used V3 kit. This will be the 5th kit I've installed so I'm familiar with the install process, but the rest were all brand new. Here are my questions:
1. Should I pre-emptively replace any of the components? Check valves, hoses, V3 components, etc.? What would you do if you just bought a used kit?

2. Any "new" additional mods I should consider doing? I was just reading about the Racor PS 120 Pre filters (do we need the 1/2" or 3/8"? Looks like 1/2" is PS120-1 and the 3/8" is PS120-2. I don't remember what size the fuel hose is), thinking about adding one of those. Also just read about the toggle switch to turn off the diesel pump as a fail safe, but couldn't find the write up. Anything else I've missed? My kit has been working flawlessly after the Scorpion upgrade, just didn't know if there are any other additions that I've missed! Maybe ball valves at the coolant Tee to turn off the heat to the V3? I put one on mine, but found I never turn it off anyway. Anybody have a good source for 5/8" Tees with a ball valve on one side?

3. Anything else I'm missing, or just forgetting about?

Thanks! I'm excited to have another veggie truck in the driveway!
__________________
Late 1999 F350 CC LB ZF6
Vegistroke V3 w/ 80 gallon tank.
Reply With Quote
  #2  
Old 11-18-2015, 03:18 AM
biostroker's Avatar
biostroker biostroker is offline
Senior Vegistroker
 
Join Date: Oct 2008
Location: Victor, ID
Miles on Grease: 100,000
$ Estimated Saved: $20,000 at $4/gallon
Posts: 296
Default

Also wondering if there are any new install tips or tricks since I've done the last one a few years ago. The engine fittings always take me forever!
__________________
Late 1999 F350 CC LB ZF6
Vegistroke V3 w/ 80 gallon tank.
Reply With Quote
  #3  
Old 11-18-2015, 05:00 AM
Hawaiian Diesel's Avatar
Hawaiian Diesel Hawaiian Diesel is offline
F350 & Excursion Greaser
 
Join Date: Aug 2008
Location: Kailua-Kona Hawaii
Miles on Grease: Plead the 5th
$ Estimated Saved: Plead the 5th
MacGyver Rating: .01
Posts: 1,546
Default

If you're vegging a 7.3, AzDave has a trick check valve relocation kit.

http://www.veggiegarage.com/products...locate_Kit.php

I have one, and will be glad if any of my check valves fail. Quick easy change.

I'd also dismantle and clean it.
__________________
2001 Excursion, V3, TS Chip, Walker BTM.
2002 F350 Crew, V2, DP Tuner, Walker BTM.

Last edited by Hawaiian Diesel; 11-18-2015 at 05:04 AM.
Reply With Quote
  #4  
Old 11-18-2015, 05:24 AM
biostroker's Avatar
biostroker biostroker is offline
Senior Vegistroker
 
Join Date: Oct 2008
Location: Victor, ID
Miles on Grease: 100,000
$ Estimated Saved: $20,000 at $4/gallon
Posts: 296
Default

Quote:
Originally Posted by Hawaiian Diesel View Post
If you're vegging a 7.3, AzDave has a trick check valve relocation kit.

http://www.veggiegarage.com/products...locate_Kit.php

I have one, and will be glad if any of my check valves fail. Quick easy change.

I'd also dismantle and clean it.
Thanks for the advice. I was just at his site checking those out! It is a 7.3, should have mentioned that. With his check valve relocation kit you just need to remove the existing hard fuel lines, install the check valves on the fuel bowl, and attach the hoses?
__________________
Late 1999 F350 CC LB ZF6
Vegistroke V3 w/ 80 gallon tank.
Reply With Quote
  #5  
Old 11-18-2015, 06:32 PM
AzDave AzDave is offline
BFT Dealer
 
Join Date: Sep 2008
Location: Mayer, Arizona
Miles on Grease: 50,000
$ Estimated Saved: Over$10,000
MacGyver Rating: .8
Posts: 1,583
Default

Yes that is all. I recommend removing Diesel fuel bowl for cleaning when installing the fittings. But some do it without removing the fuel bowl. I also include the Viton sleeves for the intake and return. Plus I am avail for help on the phone if needed. Email me at dave@veggiegarage.com and I will give you my support cell phone number. I have manifold check valves and purge valve cartridges if needed. Dave
__________________
95 Dodge Ram. Running on Recycled Vegetable Oil since 5-07. Sold.. 96 Ford F250 System in progress. 2-16 Sold 2001 F350 System in progress.Sold www.Veggiegarage.com Owner www.AzFuels.com.com
Reply With Quote
  #6  
Old 11-18-2015, 07:48 PM
biostroker's Avatar
biostroker biostroker is offline
Senior Vegistroker
 
Join Date: Oct 2008
Location: Victor, ID
Miles on Grease: 100,000
$ Estimated Saved: $20,000 at $4/gallon
Posts: 296
Default

Quote:
Originally Posted by AzDave View Post
Yes that is all. I recommend removing Diesel fuel bowl for cleaning when installing the fittings. But some do it without removing the fuel bowl. I also include the Viton sleeves for the intake and return. Plus I am avail for help on the phone if needed. Email me at dave@veggiegarage.com and I will give you my support cell phone number. I have manifold check valves and purge valve cartridges if needed. Dave
Any other recommendations?
__________________
Late 1999 F350 CC LB ZF6
Vegistroke V3 w/ 80 gallon tank.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 06:33 AM.


Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.