BioFuels Technologies Forum  

Go Back   BioFuels Technologies Forum > FORD SUPER DUTY / HEAVY DUTY DIESEL > 99-03 7.3

Reply
 
Thread Tools Display Modes
  #11  
Old 11-07-2017, 05:42 PM
AzDave AzDave is offline
BFT Dealer
 
Join Date: Sep 2008
Location: Mayer, Arizona
Miles on Grease: 50,000
$ Estimated Saved: Over$10,000
MacGyver Rating: .8
Posts: 1,553
Default

Relay wiring for V3 Veggie Pump

Terminal 1(85) Black wire. Goes to ground on both purge and after run boards.

Terminal 2(86) Yellow wire. Power From Temp Switch when temp switch is closed.

Terminal 3(30) Large Red Wire. Power to Veg Pump

Terminal 4 (87A)Green wire to terminal 6 on purge switch and to terminal 2 on purge valve.

Terminal 5.(87) Large red wire to 15 amp fuse on V3 fuse board. Power into relay. Hot when key on or off.

What I believe you did was put power to terminal 1 black wire giving power to the ground side of BOTH purge and after run boards. Burning them out.

The red lights come on when they get power from the key on circuit from the small red wire going to the board harness.

I have the relay and a good board and the wiring diagram at my side as I write this. Hope it clears up how it is wired.

I did get your email but decided to post answer here.

Dave
__________________
95 Dodge Ram. Running on Recycled Vegetable Oil since 5-07. Sold.. 96 Ford F250 System in progress. 2-16 Sold 2001 F350 System in progress. www.Veggiegarage.com Owner www.Veggiegarage.com

Last edited by AzDave; 11-07-2017 at 07:02 PM.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 09:54 AM.


Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.