Thread: Bent push rod
View Single Post
  #8  
Old 06-19-2017, 11:08 AM
skyskijason's Avatar
skyskijason skyskijason is offline
Gettin Greasy
 
Join Date: Aug 2008
Location: N. Georgia
Miles on Grease: 330,000
$ Estimated Saved: at least a little
MacGyver Rating: 1.5
Posts: 4,518
Default

Quote:
Originally Posted by Hawaiian Diesel View Post
Just finished the push rods and injectors for 3 & 5. Sent a crap load of oil on my wife's Beamer.

I did forget to fill the HPOP so it takes awhile to start.

I will need to change my injector cups.

Another project down the road.

Thanks for all the help. First push rod issue I've ever had.

I'm going to hang the rod from the Mirror to remind my son that the truck is not a race car and he will be fixing the next valve he floats.
More likely due to extended idling or lots of short trips than 'racing' - but at my house, if it breaks while you are driving it - you've gotta fix it!!!
__________________
2001 F350 XLT 4x4, dually flatbed. 6637 air filter, single-shot injectors, straight-piped, BTS tunes, 200 gal main VO tank - 180k greasy miles
2000 Excursion Limited 4x4. V3, AIS intake, BTS trans & tunes - 120k VO miles
veggiegarage.com authorized installer

RIP X & Toyhauler - you served us well.
Reply With Quote