BioFuels Technologies Forum

BioFuels Technologies Forum (http://www.biofuelstechnologies.com/forums/index.php)
-   94-97 7.3 (http://www.biofuelstechnologies.com/forums/forumdisplay.php?f=3)
-   -   94 to 97 Veggiegarage Engine Plumbing Kit (Finally) (http://www.biofuelstechnologies.com/forums/showthread.php?t=5696)

AzDave 10-18-2015 08:46 PM

94 to 97 Veggiegarage Engine Plumbing Kit (Finally)
 
1 Attachment(s)
Veggiegarage 94 to 97 Powerstroke Engine plumbing kit!! Veggiegarage Mechanical Fuel Pump replacement mount bolts to stock fuel pump mount location and even uses the stock bolts. This places the banjo bolt hole in exactly the proper place. No stress on the stock vibra-loc seals. I felt the steel lines were not ideal for veggie so Veggiegarage has the veggie flowing to the front of the heads thru our hytrel covered lines and Veggiegarage fuel T that has ORB threads on the sides and NPT on the inlet to allow for a check valve there if someone wants to feed veggie to the rear and diesel to the front.

E-Fuel brackets going to powder coating tomorrow so I will have photos of that later in the week.


All times are GMT. The time now is 04:47 AM.

Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.